title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

AC-DC Power Supplies Enclosed TypeInstruction ManualTable 6.3 Matching connectors and terminals on CN101 and CN501Connector Housing Terminal MfrCN101 1-178139-5 1-178129-6 1-175218-5 equivalent goodsTE ConnectivityCN501 178306-5 178289-6 1-353717-5 equivalent goods*Keep drawing current per pin below 8.5A? -R3- Option -R3 models provide AUX1 (12V), AUX2 (5V),remote ON/OFF control and alarms (PR,PG alarm).-Please refer to the optional parts for the dedicated harness.-Please contact us for details about appearance.+Vout-VoutAUX1AUX1GFig.6.4 When using AUX1×Do not connectCN3! AUX2 5V0.5A (convection cooling), 5V1A (forced air)- Output AUX2 is provided from CN3. AUX2 (5V±5%) can beused to power up remote control or other circuits.- AUX2 has been isolated from other circuit (input, output, FG,RC).- AUX2 output is also stopped due to thermal protection andovervoltage protection.Please contact us for details.- Do not exceed the current rating, it may causes malfunction orfailure of the internal circuitry.Fig.6.3 Example of option -R3Table 6.4 Pin assignments of CN3Pin no.Function1AUX1: AUX1 (12V1A)2AUX1G : AUX1 (GND)3AUX2: AUX2 (5V1A)4AUX2G : AUX2 (GND)5AUX2: AUX2 (5V1A)6AUX2G : AUX2 (GND)7RC: Remote ON/OFF8RCG: Remote ON/OFF (GND)9PG: PG Alarm10PGG: PG Alarm (GND)11PR: PR Alarm12PRG: PR Alarm (GND)Table 6.5 Matching connectors and terminals on CN3Connector Housing Terminal MfrS12B- PHDR-Reel : SPHD-002T-P0.5CN3Loose : BPHD-001T-P0.5 *1 J.S.T.PHDSS 12VSBPHD-002T-P0.5 *1*1 The manufacturer can offer only ratchet hand toolCN3! AUX1 12V0.3A (convection cooling), 12V1A (forced air)11 121 2- This power supply is equipped with an auxiliary 12V outputAUX1 (12V?5%) for forced air cooling which is available fromCN3.- AUX1 is not isolated from the main output circuit.- Do not connect AUX1G- to -Vout as current may fl ow throughAUX1 (fi g 6.4).- Do not exceed the current rating, it may causes malfunction orfailure of the internal circuitry.!Remote ON/OFF- You can operate the remote ON/OFF function by sendingsignals to CN3. Please see Table 6.6 for specifications andFig.6.5 for connecting examples.- Remote ON/OFF circuits (RC and RCG) are isolated from input,output FG and AUX.- Please note the following when using the remote ON/OFF function.1 Turns on by drawing current to RC.2 The current fl own to RC is a 5mA typ (maximum 25mA).3 If the output voltage is turned off through the remote ON/OFFcircuit, AUX1 stops.4 If current of a value not listed in Table 6.6 is applied between RCand RCG, the output voltage may not be generated normally.5 Please wire carefully. If you wire wrongly, the internal componentsof a unit may be damaged.* If the output of an external power supply is within the range of4.5 - 12.5V, you do not need a current limiting resistor R1. Ifthe output exceeds 12.5V, however, please connect the currentlimiting resistor R1.R1 Recommended resister [W] Ri : 780[W]V1 - (1.1 + Ri×0.005)R1=0.005Table 6.6 Specifi cations of remote ON/OFFFig.6.5 RC circuit example ?R3Output on SW short (3mA min)SW LogicOutput off SW open (0.1mA max)AEA-16