title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

AC-DC Power Supplies Enclosed TypeHFA3500TFOrdering informationHF A 3500 TF -OO -O1 2 3 4 5 6HFAR1 Series name2 Single output3 Output wattage4 3 phase full range input5 Output voltage6 OptionalR : with Remote ON/OFFPositive logic controlG : Low leakage currentI4 : with MODBUS interfaceMODELHFA3500TF-48HFA3500TF-65MAX OUTPUT WATTAGE[W]35043510DC OUTPUT48V 73A65V 54ASPECIFICATIONSMODELHFA3500TF-48HFA3500TF-65VOLTAGE[VAC]*1180 - 528 3f3-wire (Available to 3f 4-wire as well (without N phase) )CURRENT[A]FREQUENCY[Hz]50 / 60 (45 - 66)ACIN 200V (Io=100%) 91typ 92typEFFICIENCY[%]INPUTACIN 400V (Io=100%) 93typ 94typPOWER FACTORINRUSH CURRENT[A]LEAKAGE CURRENT[mA]3 max (ACIN 480V 60Hz, Io=100%, Complies with IEC62368-1)VOLTAGE[V]4865CURRENT[A]7354LINE REGULATION[mV]192max260maxLOAD REGULATION[mV]300max450maxRIPPLE[mVp-p]OUTPUTTEMPERATURE0 to +50C390max530maxREGULATION[mV]-10 to +0C480max650maxSTART-UP TIME[ms]400 typ (ACIN 200/400V, Io=100%)HOLD-UP TIME[ms]20 typ (ACIN 200V, Io=55%) / 10 typ (ACIN 200V, Io=100%)OUTPUT VOLTAGE ADJUSTMENT RANGE[V]24.00 to 55.2032.50 to 74.75OUTPUT VOLTAGE SETTING[V]48.00 to 48.4865.00 to 65.65OVERCURRENT PROTECTIONWorks over 105% of rating (Recovers automatically, Hiccup overcurrent)OVERVOLTAGE PROTECTION[V]57.60 to 67.2078.00 to 91.00PROTECTIONREMOTE SENSINGProvidedCIRCUIT ANDOTHERSREMOTE ON/OFFProvidedDC_OK LAMPLED (Blue)ALARM LAMPLED (Amber)Input - Output,CN1, CN2, CN34,243VAC 1minute, Cutoff current = 20mA, 500VDC 50MW min (At room temperature)Input - FG2,829VAC 1minute, Cutoff current = 20mA, 500VDC 50MW min (At room temperature)ISOLATIONOutput, CN1, CN2 - FG2,000VAC 1minute, Cutoff current = 10mA, 500VDC 50MW min (At room temperature)Output, CN1, CN2 - CN3500VAC 1minute, Cutoff current = 10mA, 500VDC 50MW min (At room temperature)CN3 - FG500VAC 1minute, Cutoff current = 10mA, 500VDC 50MW min (At room temperature)OPERATING TEMP.,HUMID.AND ALTITUDE-10 to +70C (Refer to“Derating”), 20 - 90%RH (Non condensing), 3,000m (10,000 feet) maxENVIRONMENTIMPACT196.1m/s 2 (20G), 11ms, once each along X, Y and Z axisSAFETY ANDAGENCY APPROVALSUL62368-1, EN62368-1, C-UL (equivalent to CAN/CSA-C22.2 No.62368-1)NOISE REGULATIONSCONDUCTED NOISEComplies with FCC Part 15-A, FCC Part18-A, CISPR11-A, CISPR32-A, EN55011-A, EN55032-A, VCCI-AOTHERS*1Output derating is required at 180 - 200VAC. Refer to“Derating”.*2The value is primary surge. The current of input surge to a built-in EMI/EMS Filter (0.2ms or less) is excluded. More than 3 sec. to re-start.*3Measured by 20MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKUGIKEN : RM104). Please refer to the instruction manual 1.7.*Sound noise may be generated by power supply in case of pulse load.HFA-2? 108 ?