title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

AC-DC Power Supplies Enclosed TypeInstruction Manual6.3 Isolation!When you run a Hi-Pot test as receiving inspection, gradually increasethe voltage to start. When you shut down, decrease thevoltage gradually by using a dial. Please avoid a Hi-Pot testerwith a timer because, when the timer is turned ON or OFF, it maygenerate a voltage a few times higher than the applied voltage.!When you test a unit for isolation between the input and output orbetween the output and the terminal FG, short-circuit between theoutput and the terminals RCG, PGG and AUXG.6.4 Auxiliary Power (AUX)? PBA300F, PBA600F, PBA1000F, PBA1500Fand PBA1500T!The power supplies can generate an auxiliary power (AUX: 12V0.1A) from CN3 to provide for remote ON/OFF and attached circuits.!AUX circuit is isolated from other (input, output, FG, RC and PG)circuits.!Please do not draw a current of 0.1A or higher from the auxiliarypower because doing so could damage the internal circuits orcause malfunction.When you connect a DC-DC converter, a current a few timeshigher than normal current may fl ow at start-up. Please check thecurrent.6.5 External Component (EMI/EMC Filter)? PBA1500F and PBA1500T!You can have the power supplies comply with FCC Part 15 classB and EN55022-B by connecting an external EMI/EMC Filter.Recommended EMI/EMC FilterPBA1500F : NAC-20-472 (COSEL)PBA1500T : TAC-10-683 (COSEL)7.1 Outline of Options*Please inquire us for details of specifi cations and delivery timing.*You can combine multiple options. Some options, however, cannotbe combined with other options. Please contact us for details.? -C7 Options-Option -C models have coated internal PCB for better moistureresistance.? -E and -G-Options -E and -G models are low leakage current type.-Differences from standard versions are summarized in Table 7.1.Table 7.1 Low leakage current type-E*-GLeakage Current(AC240V)0.5mA max0.15mA maxConducted NoiseClass AN/AOutput Ripple Noise 150% of standard models 200% of standard models*PBA50F, PBW50F, PBA75F, PBA100F and PBA150F? -U(PBA300F, PBA600F, PBA1000F,PBA1500F and PBA1500T)-Operation stop voltage of Option -U models are set at a lowervalue than that of a standard version to support low input voltage.-Use ConditionsOutputPBA300F 125W (83W) PBA1000F 500W (330W)PBA600F 250W (165W)Input AC50V (DC70V)Duty 1s/30sOutputPBA1500F 750W (495W) PBA1500T 750WInput AC50V(DC70V) Input AC100V 3fDuty 1s/30s*Please avoid using continuously for more than 1 secondunder above conditions. Doing so may cause a failure.? -F1 (PBA600F, PBA1000F, PBA1500F andPBA1500T)-Option -F1 models have a longer-life fan instead of a standardfan. This option is not available for PBA300F.-Differences from standard versions are summarized in Fig.7.1(Life expectancy of fan).-Appearance of PBA600F changes in Option -F. Please see ExternalView for details.PBA/PBW-44