title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

SNA series (6A)External viewStandard TypeTerminal block Type52[2.05]40±0.5[1.57]CN14141CN2Name PlateCN34141CN42-f4.56-M32-f4.5[0.18] Mounting Hole[0.18] Mounting Hole+VoutTB1TB2COM-out+VinName Plate-VoutCOM-in-Vin52[2.05]40±0.5[1.57]6.2[0.24]7.6[0.3]MountingPlate106±0.5[4.17]117[4.61]MountingPlate106±0.5[4.17]117[4.61]Terminal cover35[1.38]35[1.38]CN1Pin No.FunctionCN3Pin No.Function1,2COM-in1,2COM-out3,4+Vin3,4+VoutCN2Pin No.FunctionCN4Pin No.Function1,23,4-VinCOM-in1,23,4-VoutCOM-out¶Tolerance :±1[±0.04]¶Weight : 150g max¶PCB Material /thickness : CEM3 /1.6mm [0.06 inches]¶Mounting plate : Iron (surface finishing : nickel plating) t=1.0 [0.04]¶Case : PBT¶Dimensions in mm, [ ]=inches¶Keeping drawing current per pin below 5A for CN1 to CN4I/O Connector Mating connector TerminalCN1~CN4 B4P-VH VHR-4N Reel:SVH-21T-P1.1Bulk:BVH-21T-P1.1(Mfr:J.S.T)Option harness : Refer to Instruction Manual 4¶Tolerance :±1[±0.04]¶Weight : 160g max¶PCB Material /thickness : CEM3 /1.6mm [0.06 inches]¶Mounting plate : Iron (surface finishing : nickel plating) t=1.0 [0.04]¶Case : PBT¶Dimensions in mm, [ ]=inches¶Terminal block screw tighting torque M3:0.8N-m (8.5kgf-cm) maxDIN rail installation TypeTerminal block type+DIN rail installation Type6-M310[0.39]INCN14141CN2Name PlateCN34141CN4OUT52[2.05]+VinCOM-in-Vin10[0.39]INTB1Name PlateTB2OUT+VoutCOM-out-Vout6.2[0.24]7.6[0.3]52[2.05]M4FG108.5[4.27]112[4.41]Mounting PlateM4FG108.5[4.27]112[4.41]Mounting PlateTerminal cover(9)[0.35]35[1.38]8[0.31]35[1.38]8[0.31]CN1Pin No.1,23,4FunctionCOM-in+VinDIN railCN3Pin No.1,23,4FunctionCOM-out+Vout¶Tolerance :±1[±0.04]¶Weight : 160g max¶PCB Material /thickness : CEM3 / 1.6mm [0.06 inches]¶Mounting plate : Iron (surface finishing : nickel plating) t=1.0 [0.04]¶Case : PBT¶Dimensions in mm, [ ]=inches¶Keeping drawing current per pin below 5A for CN1 to CN4CN2CN4Pin No.FunctionPin No.FunctionI/O ConnectorMating connectorTerminal1,2-Vin1,2-VoutCN1~CN4B4P-VH VHR-4NReel:SVH-21T-P1.13,4COM-in3,4COM-outBulk:BVH-21T-P1.1(Mfr:J.S.T)Option harness : Refer to Instruction Manual 4(9)[0.35]DIN rail¶Tolerance :±1[±0.04]¶Weight : 170g max¶PCB Material /thickness : CEM3 /1.6mm [0.06 inches]¶Mounting plate : Iron (surface finishing : nickel plating) t=1.0 [0.04]¶Case : PBT¶Dimensions in mm, [ ]=inches¶Terminal block screw tighting torque M3:0.8N-m (8.5kgf-cm) max!Note when installing the EMI/EMCFilter on a DIN rail.When the EMI/EMC Filter is grounded throughthe DIN rail, the proper noise attenuation may notbe achieved.Be sure to connect the FG terminal of the EMI/EMC Filter body to the earth.1CN214Name PlateINCN14DIN rail1CN414CN34OUTSN-4