title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

AC-DC Power Supplies Enclosed TypeSCHA 10000T/SCDA 10000TOrdering informationSC H A 10000 T -48 -1 2 3 4 5 6 7SCRExample recommended EMI/EMC filterFilter TAC-50-2231 Series name2 External formH:Wide front interfaceD:Compact front interface3 Single output4 Output wattage5 Three-phase input6 Output voltage7 Optional* A higher current rating EMI/EMC filtermay be recommended in view of theother devices that could be connectedin parallel with the power supply.SCHA10000TSCDA10000T*Make sure necessary tests will be carried out on your end equipment with the power supply installed in accordance with any required EMC/EMI regulations.SPECIFICATIONSINPUTOUTPUTPROTECTIONCIRCUIT ANDOTHERSISOLATIONENVIRONMENTSAFETY ANDNOISEREGULATIONSOTHERSMODEL SCHA10000T-48 SCDA10000T-48VOLTAGE[V]CURRENT[A] ACIN200V 35typAC160 - 264 3fFREQUENCY[Hz] 50/60 (47 - 63)EFFICIENCY[%] ACIN200-240V 90typPOWER FACTOR ACIN200-240V 0.99typ (Io=100%)INRUSH CURRENT[A] ACIN240V *1LEAKAGE CURRENT[mA]VOLTAGE[V] 48CURRENT[A] 208WATTAGE[W] 9,984LINE REGULATION[mV]LOAD REGULATION[mV]60typ / 80typ (Primary inrush current /Secondary inrush current) (More than 3 sec. to re-start)5.0max (ACIN 240V 60Hz, Io=0 - 100%, According to IEC62368-1)192max720maxRIPPLE[mVp-p] 0 to +50C *2 150maxRIPPLE NOISE[mVp-p] 0 to +50C *2 200max (BW:500MHz)TEMPERATURE REGULATION[mV] 0 to +50C 240maxDRIFT[mV] *3 192maxSTART-UP TIME[ms] *6 750max (ACIN 200V, Io=100%)HOLD-UP TIME[ms]OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 43.2 - 52.820typ (ACIN200V, Io=100%)OUTPUT VOLTAGE SETTING[V]47.0 - 49.0OVERCURRENT PROTECTIONActivate over 105% - 120% of rated current and recovers automatically. (Shut down if low-voltage protection activated)OVERVOLTAGE PROTECTION[V]*456.0 - 59.0 (shut down)LOW-VOLTAGE PROTECTION[V]*428.8 - 33.6 (shut down)OPERATING INDICATIONLED : Green (48VDC output), White (AC IN)ALARM OUTPUTDetecting low input voltage, detecting open phase, detecting low output voltageREMOTE ON/OFF (SYSTEM ON/OFF)Provided(INPUT) - (OUTPUT-SYSTEM ON/OFF-REMOTE SIGNAL ON/OFF-ALARM)(INPUT) - (FG)AC3,000V 1minute, Cutoff current = 100mA, DC2,200V 1minute, Cutoff current = 1mA (At Room Temperature)DC500V 50MW min (At Room Temperature)AC2,000V 1minute, Cutoff current = 100mA, DC2,200V 1minute, Cutoff current = 1mA (At Room Temperature)DC500V 50MW min (At Room Temperature)(OUTPUT-SYSTEM ON/OFF-REMOTESIGNAL ON/OFF-ALARM) - (FG)AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At Room Temperature)(OUTPUT) - (SYSTEM ON/OFF-REMOTEAC100V 1minute, Cutoff current = 50mA, DC100V 10MW min (At Room Temperature)SIGNAL ON/OFF-ALARM)OPERATING TEMP.,HUMID.AND ALTITUDE0 to +50C, 20 - 85%RH (Non condensing), 3,000m(10,000feet) max (Refer to Cooling method)STORAGE TEMP.,HUMID.AND ALTITUDE-25 to +85C, 20 - 90%RH (Non condensing), 9,000m(30,000feet) maxVIBRATION10 - 55Hz, 19.6m/s 2 (2G) , 3minutes period , 30 minutes each along X,Y and Z axisIMPACT196.1m/s 2 (20G), 11ms, once each along X, Y and Z axisAGENCY APPROVALSUL60950-1, C-UL (CSA60950-1), EN62368-1 compliesCONDUCTED NOISEComplies with EN55011 Group1-A, EN55022-A, CISPR22-A, FCC part15 classA, additional EMI/EMC Filter required for meeting class BHARMONIC ATTENUATORComplies with IEC61000-3-12CASE SIZE/WEIGHT*5459X150X320mm [18.07X5.91X12.6 inches] (WXHXD)/23kg max310.5X150X510mm [12.22X5.91X20.08 inches] (WXHXD)/20kg maxCOOLING METHODForced cooling (require external fan)*1The current of input surge to a built-in noise filter (0.2ms or less) is excluded.*2Measured by 500MHz oscilloscope.*3Drift is the change in DC output for an eight hour period after a half-hour warm-upat 25C, with the input voltage held constant at the rated input/output.*4To recover output voltage, recycle input voltage after 3 or more seconds.*5 Case size contains neither the terminal blocks, connector and screw nor.*6 When input voltage recycling is needed for output recovery, AC power shall be removedand cycled after 3 seconds to reset the protection circuit.Please contact us when it’s necessary to restart the power supply in less than 3 seconds.SC-2? 144 ?