This page is the summary of page 164 of the ebook "COSEL Power Supply, Noise Filter 2025 Product Catalog."
You can click "Open This Page" or "Open 1st Page" button, and open the ebook.
COSEL Power Supply, Noise Filter 2025 Product Catalog
TECS-seriesAssembling and Installation MethodInstallation method!This power supply is manufactured by SMD technology. Do not touch any SMD components on the unit. Be especially careful when handling.TECS!If using a metal chassis, keep proper insulation between thecomponent and metal chassis, use the spacer of 8mm or morebetween bottom of power supply and metal chassis (except -Nmodel).If d1 and/or d2 are less than the value mentioned in right fi gure,insert an insulating sheet with reinforced insulation between thepower supply unit and metal chassis (except -N model).The following distance is not satisfactory for cooling condition.Please refer to“Derating”and Instruction Manual 4 for coolingmethod.CN1CN1d2d2d2d2d1＝8mm mind2＝5mm min!There is a possibility that it is not possible to cool enough whenthe power supply is used by the sealing up space as showing inright fi gure.Please use it after confi rming the temperature of points 1 of InstractionManual 4.d2CasePower supply!Standard model can be mounted in the mounting position shown in the fi gure below.(A)(B) (C) (D)(E) (F)CN1CN1CN1Standard positionCN1CN1CN1!Option-N model can be mounted in the mounting position shown in the fi gure below.The installation of (F) possible only forced air cooling.(A)(B) (C) (D)(E) (F)CN1CN1CN1Standard positionCN1CN1CN1TECS-10? 162 ?
