title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

AC-DC Power Supplies Open FrameLHP300FOrdering informationLH P 300 F -OO -O1 2 3 4 5 6LHPLHP-4RRThis power supply is manufactured by SMD technology. The stress to PCB like twisting or bending causes the defect of the unit, so handle the unit with care.*Make sure necessary tests will be carried out on your end equipment with the power supply installed in accordance with any required EMC/EMI regulations.1 Series name2 Single output3 Output wattage4 Universal input5 Output voltage6 Optional *1C : with CoatingG : Low leakage currentJ4 : EP(TE Connectivity) connector typeJ5 : 8pin type (Output connector)RO : with Remote ON/OFFS : with ChassisSN : with Chassis & coverT : Terminal block typeT4 : Push-in Terminal Block TypeT5 : UL508U1 : Can be attached the externalcapacitor unitFor option details, refer toinstruction manual 7.1.MODELLHP300F-24-YLHP300F-30-YLHP300F-36-YLHP300F-42-YLHP300F-48-YMAX OUTPUT WATTAGE[W]*2300.0 (600.0)300.0 (600.0)302.4 (604.8)302.4 (604.8)302.4 (604.8)DC OUTPUT*224V12.5A (25.0A)30V10.0A (20.0A)36V8.4A (16.8A)42V7.2A (14.4A)48V6.3A (12.6A)SPECIFICATIONSMODELLHP300F-24-YLHP300F-30-YLHP300F-36-YLHP300F-42-YLHP300F-48-YVOLTAGE[VAC]85 - 264f1f (Refer to“Derating”and Instruction Manual 1.1) *8CURRENT[A]FREQUENCY[Hz]50 / 60 (45 - 66)ACIN 100V 91.5typ 91.5typ 91.5typ 91.5typ 92.0typEFFICIENCY[%]INPUTACIN 230V 93.5typ 93.5typ 93.5typ 93.5typ 94.0typPOWER FACTOR (Io=100%)INRUSH CURRENT[A]ACIN 100V15typ (Io=100%) Ta=25Cat cold start*3ACIN 230V35typ (Io=100%) Ta=25Cat cold startLEAKAGE CURRENT[mA]0.40/0.75max (ACIN 100 / 240V, 60Hz, Io=100%, According to IEC62368-1, and DEN-AN)VOLTAGE[V]2430364248CURRENT[A]*2*812.5 (peak 25.0)10.0 (peak 20.0)8.4 (peak 16.8)7.2 (peak 14.4)6.3 (peak 12.6)LINE REGULATION[mV]*496max120max144max168max192maxLOAD REGULATION[mV]*4150max195max240max240max240max0 to +50C 300max 300max 300max 300max 300maxRIPPLE[mVp-p]-10 to 0C 380max 420max 420max 420max 420max*5Io=0 to 10% 380max 420max 420max 420max 420maxOUTPUT0 to +50C 390max 390max 390max 390max 390maxRIPPLE NOISE[mVp-p]-10 to 0C 500max 500max 500max 500max 500max*5Io=0 to 10% 500max 500max 500max 500max 500maxTEMPERATURE REGULATION[mV]DRIFT[mV]*696max120max144max168max192maxSTART-UP TIME[ms]70typ (ACIN 100V, Io=100%)HOLD-UP TIME[ms]20typ (ACIN 100V, Io=100%)OUTPUT VOLTAGE ADJUSTMENT RANGE[V]22.80 to 26.4028.50 to 33.0034.20 to 39.6039.90 to 46.2045.60 to 52.80OUTPUT VOLTAGE SETTING[V]24.00 to 24.9630.00 to 31.2036.00 to 37.4442.00 to 43.6848.00 to 49.92OVERCURRENT PROTECTIONWorks over 101% of rating and recovers automaticallyPROTECTION OVERVOLTAGE PROTECTION [V]27.6 to 33.634.5 to 42.041.4 to 50.448.3 to 58.855.2 to 67.2CIRCUIT AND OPERATING INDICATIONNot providedOTHERSREMOTE SENSINGNot providedREMOTE ON/OFF (-RO)Option (Refer to Instruction Manual 7.1)INPUT-OUTPUT-RC*7AC3,000V 1minute Cutoff crrent = 10mA, DC500V 100MΩmin (At Room Temperature)ISOLATIONOUTPUT-RC*7AC100V 1minute Cutoff crrent = 25mA, DC100V 100MΩmin (At Room Temperature)OPERATING TEMP.,HUMID.AND ALTITUDE *8-10 to +70C, 20 - 90%RH (Non condensing), 5,000m (16,500 feet) max, (EN62477-1 (OVCⅢ):2,000m (6,600 feet) max)ENVIRONMENTIMPACT196.1m/s 2 (20G), 11ms, once each X, Y and Z axisSAFETY ANDNOISEREGULATIONSOTHERSAGENCY APPROVALSUL62368-1, C-UL (equivalent to CAN / CSA-C22.2No.62368-1), EN62368-1, EN62477-1 (OVCⅢ)Complies with DEN-ANCONDUCTED NOISEComplies with FCC-B, VCCI-B, CISPR32-B, EN55011-B, EN55032-BHARMONIC ATTENUATOR *9Complies with IEC61000-3-2 (Class A)CASE SIZE/WEIGHT84X37X180mm [3.31×1.46×7.09 inches] (W×H×D) / 580g max (with chassis & cover : 890g max)COOLING METHOD*8Convection / Forced air (Requires external fan) (Refer to“Derating”)*1 The listed optios may affect the published standard specifications. Please contact us fordetailed product specifications and safety approvals.*2 Peak loading for 10sec. And Duty 40% max, refer to Instruction Manual 6. In detail. ( )means peak current. There is a possibility that an internal device is damaged when thespecification is exceeded.*3 The current of input surge to a built-in EMI/EMS Filter (0.2ms or less) is excluded.*4 In the case of dynamic fluctuations, the specifications may not be met.*5 Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN :RM104). Please refer to the instruction manual 1.7.? 170 ?Example recommended EMI/EMC filterEAC-03-472EAC-06-472High voltage pulse noise type : EAP seriesLow leakage current type : EAM series* A higher current rating EMI/EMC filtermay be recommended in view of theother devices that could be connectedin parallel with the power supply.*6Drift is the change in DC output for an eight hour period after a half-hour warm-up at25C, with the input voltage held constant at the rated input/output.*7Applicable when Remote ON/OFF (optional) is added.*8Derating required.For use with DC input is Refer to Instruction Manual 1.1 and 7.1.*9Please contact us about another class.*To meet the specification, do not operate overload conditon.*Parallel operation is not possible.*Sound noise may be generated by power supply in case of pulse load.*Burst operation may occur when the load factor is 10% or less.