title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

AC-DC Power Supplies Open FrameInstruction Manual6 Option and Others6.1 Outline of options? -E2-Option -E2 models are low leakage current type.-The capacitor between primary and secondary has beenchanged from the standard type.-Differences from standard versions are summarized in Table 6.1and 6.2.TECS10F/20F/45F-Hl 2 Pt・l 2 1 +l 2Lt 2rms＝t1 +t 2・t 1 [10[sec]・l p [Rated peak current[A] Refer to Fig 6.2・l rms [Rated current[A]t 1・Duty＝×100[%][45[%]t1 +t 2TECS65F-Hl 2 Pt・l 2 1 +l 2Lt 2rms＝t1 +t 2Table 6.1 Low leakage current type (TECS10F/20F-E2)Leakage Current0.075mA MaxConducted NoiseN/A・t 1 [5[sec]・l p [Rated peak current[A] Refer to Fig 6.2・l rms [Rated current[A]Table 6.2 Low leakage current type (TECS45F/65F-E2)Leakage Current0.15mA MaxConducted NoiseN/At 1・Duty＝t1 +t 2×100[%] Refer to Fig 6.3 derating? -Y (TECS10F/20F)-Option -Y units can adjust the output voltage by attached potentiometer.-Refer to the adjustable range to the table 6.3.Table 6.3 Output voltage adjustment rangeOutput voltageOutput voltage adjustment range[V]5V4.75 to 5.512V10.8 to 13.215V13.5 to 16.524V21.6 to 26.4Peak current [%]1008090 100Input voltage [VAC]Fig.6.2 Peak current derating curve depending on input voltage! To increase output voltage, turn a built-in potentiometer clockwise.To decrease the output voltage, turn it counterclockwise.! Please take care when you adjust output voltage by potentiometer,because there is possibility of electric shock and breakdownwhen contacting to other internal circuit by electrically conductivetool.? -H (TECS10F/20F/45F/65F-12,24)-Option -H models can output the peak current.Peak load is possible to draw as below.Output current [A]lp : peak currentlrms : effective currentlL : load current0t1t2t [sec]Fig.6.1 Peak current? -NDuty [%]5040302010065 70 75 80 85 90 95Peak Output Power [W]Fig.6.3 Duty of peak output power (TECS65F-H)--N indicates a type with cover (Refer to external view).-Please refer to“Derating”.-Please refer to Fig 6.4 and 6.5 for the position of Point1.“Maximum tenperature of measurement points”,“Life expectancy”and“Warranty”is different from standard models. Pleaserefer to Table 6.4 to Table 6.15.-The life expectancy in the upper bound temperature is two yearsor more.TECS-20