title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

AC-DC Power Supplies PCB Mount TypeTUHS15Ordering informationTUH S 15 F 121 2 3 4 5R1 Series name2 Single output3 Output wattage4 Universal Input5 Output voltageTUHS*Avoid short circuit between +BC and -BC. It may cause the failure of inside components.*To use TUHS, external components are required. Refer to the instruction manual for details.ClassⅡMODELTUHS15F12TUHS15F15TUHS15F24MAX OUTPUT WATTAGE[W]15.0015.0015.12DC OUTPUT12V 1.25A15V 1A24V 0.63ASPECIFICATIONSMODELTUHS15F12TUHS15F15TUHS15F24VOLTAGE[V]AC85 - 264 1f DC120 - 370CURRENT[A]INPUTFREQUENCY[Hz]50/60 (47 - 63)EFFICIENCY[%]INRUSH CURRENTLimited by external componentsVOLTAGE[V]121524CURRENT[A]1.2510.63LINE REGULATION[mV]48max60max96maxLOAD REGULATION[mV]100max120max150max30 to 100% Load *1 160max 160max 200maxRIPPLE[mVp-p]0 to 30% LoadAC85V - 240V *1480max 480max 580maxOUTPUTRIPPLE30 to 100% Load *1 200max 200max 240maxNOISE[mVp-p] 0 to 30% LoadAC85V - 240V *1560max560max660maxTEMPERATURE0 to +50C180max240max360maxREGULATION[mV]-40 to +50C270max360max480maxDRIFT[mV]*248max60max96maxOUTPUT VOLTAGE SETTING[V] 11.40 - 12.6014.25 - 15.7523.00 - 25.00PROTECTION CIRCUIT OVERCURRENT PROTECTIONWorks over 105% of rating and recover automaticallyAND OTHERSOVERVOLTAGE PROTECTION[V]13.20 - 19.2016.50 - 24.0026.40 - 38.40ISOLATIONINPUT-OUTPUTAC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C)OPERATING TEMP.,HUMID.AND ALTITUDE-40 to +85C, 20 - 95%RH (Non condensing) (Refer to“Derating”), 3,000m (10,000 feet) maxENVIRONMENTIMPACT196.1m/s 2 (20G), 11ms, once each along X, Y and Z axisSAFETYAND NOISEREGULATIONSOTHERSAGENCY APPROVALSUL60950-1, C-UL (CSA60950-1), EN62368-1CONDUCTED NOISEComplies with FCC-B,VCCI-B,CISPR-B,EN55022-B *3HARMONIC ATTENUATORComplies with IEC61000-3-2 (Class A) (Not built-in to active filter)CASE SIZE/WEIGHT33.0X15.0X22.0mm[1.3X0.59X0.86 inches] (WXHXD) / 25g maxCOOLING METHODConvection / Forced air*1Refer to instruction manual for measuring method of electric characteristics.*2Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated value.*3Do not ground secondly circuit, in case of a standard adapted.*Measured with 68μF capasitor as Cbc.TUHS-8? 276 ?