Summary
COSEL Power Supply, Noise Filter 2025 Product Catalog
RDC-DC Converters PCB Mount TypeMUW3Ordering informationMU W 3 12 12 B -O1 2 3 4 5 6 71 Series name2 Dual output3 Output wattage4 Input voltage5 Output voltage6 Mounting typeB : SMDC : DIP7 OptionalG : Capacitor between Inputand Output is removed.MUMODELMUW30512MUW30515MUW31212MUW31215MUW32412MUW32415MUW34812MUW34815MAX OUTPUT WATTAGE[W]3.1233.1233.1233.123DC OUTPUTSPECIFICATIONSMODEL MUW30512 MUW30515 MUW31212 MUW31215 MUW32412 MUW32415 MUW34812 MUW348154.5 - 9(Surge voltage 12.5V, 100ms max)*1Single output +24V, +30V with no use of COM.*2Rated input 5V, 12V, 24V or 48V DC Io=100%*3Symmetrical loading from 20% to 100%.*4Symmetrical loading from 0% to 100%.*5Ripple and Ripple Noise is measured by using test board with ceramic capacitor 1 F at25mm from output pins.*Parallel operation with other model is not possible.9 - 18(Surge voltage 25V, 100ms max)18 - 36(Surge voltage 50V, 100ms max)36 - 76(Surge voltage 100V, 100ms max)VOLTAGE[VDC]INPUTCURRENT[A]*20.75typ0.72typ0.31typ0.3typ0.16typ0.15typ0.078typ0.075typEFFICIENCY[%]*284typ84typ84typ84typ84typ84typ84typ84typVOLTAGE[V]±12 or +24±15 or +30±12 or +24±15 or +30±12 or +24±15 or +30±12 or +24±15 or +30CURRENT[A]0.130.10.130.10.130.10.130.1LINE REGULATION[mV]60max75max60max75max60max75max60max75maxLOAD REGULATION[mV]OUTPUTTEMPERATURE REGULATION[mV]START-UP TIME[ms]20max (Minimum input, Io=100%)OUTPUT VOLTAGE ADJUSTMENT RANGEFixed (TRM pin open) +10%, -5% adjustable by external VROUTPUT VOLTAGE SETTING[V]11.64 - 12.3614.55 - 15.4511.64 - 12.3614.55 - 15.4511.64 - 12.3614.55 - 15.4511.64 - 12.3614.55 - 15.45PROTECTIONOVERCURRENT PROTECTIONWorks over 105% of rating and recovers automaticallyCIRCUIT ANDOTHERSREMOTE ON/OFFProvided (Negative logic L : ON, H :OFF)ISOLATIONINPUT-OUTPUTAC500V 1minute, Cutoff current=10mA, DC500V 50MW min (20±15C)OPERATING TEMP.,HUMID.AND ALTITUDE-40 to +100C, 20 to 95%RH (Non condensing) (Refer to“Derating”), 5,000m (16,400feet) maxENVIRONMENTIMPACT490.3m/s 2 (50G) 11ms, once each along X, Y and Z axisSAFETYAGENCY APPROVALSUL62368-1 C-UL (equivalent to CAN / CSA-C22.2 No.62368-1), EN62368-1OTHERSMUS . MUW-8 ? 290 ?