Summary
COSEL Power Supply, Noise Filter 2025 Product Catalog
MU-seriesPin Configuration? MU Single Output1231pin mark467Pin No.Pin TerminalNameFunction1+Vin+DC Input2RCRemote ON/OFF (excluding 1R5)3-Vin-DC Input4+Vout+DC Output5COMGND of Output Voltage (for Dual Output)6TRMOutput Voltage Adjustment (please seeInstruction Manual 1.4)7-Vout-DC Output? MU Dual (±) Output1pin markMU1234567Assembling and Installation MethodInstallation!You can install the units in any direction. Place them in such a way that there is enough ventilation so that heat does not get accumulatedaround them.!Do not place land or pattern layouts in the hatched area shown in below. Doing so may cause insulation failure on the PCB surface onwhich the power supply is mounted.+Vin22Outer Contourof the Unit+Vout-Vin-Vout*Top view*Dimensions in mmArea where Pattern Layout should not be Placed for MUAutomatic Mounting (TYPE: B)!To mount MU series automatically, use the central area of the case as a pickup point. If the bottom dead point of a suction nozzle is toolow when mounting, excessive force is applied to the internal compornents, which could cause damage. Please mount carefully. Pleasesee the External View for details of the pickup point.Hand Mounting (TYPE:B,C)!To mount MU series manually, it must be push the center of case.!Due to prevent failure, PS should not be pull after soldering withPCB.pushpushMUS . MUW-18 ? 300 ?
