title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

AC-DC Power Supplies Open Frame/ Enclosed TypeInstruction Manual? -S--SN--S indicates a type with chassis, and -SN indicates a type withchassis and cover (Refer to external view).Please contact us about the detail of derating curve.-Please contact us about the detail of LFP300F.? -SNF (LFP300F-24-TY)-In option -SNF, the cover, chassis and cooling fan are added.-The appearance of option -J and -J1 models are defferent fromthe of standard appearance. Please contact us about the detail.-Oil and other chemical liquid splashing environment may causethe performance degradation and failure.? -R-You can control output ON/OFF remotely in Option -R models.To do so, connect an external DC power supply and apply avoltage to a remote ON/OFF connector, which is available asoption.Model NameBuilt-inResistorRi [ W ]Voltage between RC (+)and RC (-) [V]Output ON Output OFFInputCurrent[mA]LFP100F, LFP150FLFP240F, LFP300F7804.5 - 12.50 - 0.520maxExternal PowerSourceR *1Input CurrentSWRC (+)RC (-)12Inside of a PowerSupplyRi? -R2-The usege is the same as option -R, please refer to Option -R.-Reducing standby power is possible by OFF signal of the remotecontrol.-Start up time by ON signal in remote control is 350ms(typ).-The latch condition in overvoltage protection is removed by togglingON/OFF signal of remote control.-Standby powerLFP100F, LFP150F, LFP240F0.2Wtyp (AC100V), 0.7Wtyp (AC200V)LFP300F0.25Wtyp (AC100V), 1.1Wtyp (AC200V)? -T (LFP240F, LFP300F)-Option -T models have vertically positioned screws on a terminalblock.-Please contact us for details about appearance.FGAC (N)-VAC (L)+VFig.7.2 Example of option -T!The screw can be held to terminal block by inserting and lifting thescrewdriver from the side of terminal block.+ screwdriverscrewRemote ON/OFF connector (Optional)Fig.7.1 Example of using a remote ON/OFF circuit- Dedicated harnesses are available for your purchase. Pleasesee Optional Parts for details.*1 If the output of an external power supply is within the rangeof 4.5 - 12.5V, you do not need a current limiting resistor R. Ifthe output exceeds 12.5V, however, please connect the currentlimiting resistor R.To calculate a current limiting resistance value, please use the followingequation.R[W]= Vcc-(1.1+RiX0.005)0.005* Please wire carefully. If you wire wrongly, the internal componentsof a unit may be damaged.!Remote ON/OFF circuits (RC+ and RC-) are isolated from input,output and FG.f5.5MAX? -T1 (LFP300F)Fig.7.3 lifting methodterminal block-Option -T1 models have horizontally positioned screws on a terminalblock.-Please contact us for details about appearance.FGAC (N)AC (L)-V+VFig.7.4 Example of option -T1LFP-19