title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

GENERAL SPECIFICATIONSISOLATIONENVIRONMENTINPUT-OUTPUTINPUT-CASEOUTPUT-CASEOPERATING TEMP.,HUMID.AND ALTITUDESTORAGE TEMP.,HUMID.AND ALTITUDEVIBRATIONIMPACTMGFS40DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)-40 to +85C, 20 to 95%RH (Non condensing) (Refer to“Derating”), 5,000m (16,400feet) max-40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max10 - 55Hz, 98.0m/s 2 (10G), 3minutes period, 60minutes each along X, Y and Z axis490.3m/s 2 (50G), 11ms, once each along X, Y and Z axisSAFETY AGENCY APPROVALS UL62368-1, C-UL(CSA62368-1), EN62368-1OTHERSCASE SIZE/WEIGHTCOOLING METHOD25.4X9.9X25.4mm (WXHXD) / 30g maxConvection/Forced air*1MGFW40xx12/MGFW40xx15 is available as single output +24V/+30V*2Rated input voltage (DC5V, DC24V, DC48V) Io=100%*3Riple and Ripple Noise is measured by using test board with ceramic capacitor 22μF and Recommended Capacitance at 50mm from output pins. (20MHz Oscilloscope)*4Drift is the DC output accuracy for eight hour period after a half-hour warm-up at 25C*5Rated input voltage (DC5V, DC24V, DC48V), rated output wattage, ambient temperature at 25C*Parallel operation with other model is not possible.External viewMGName Plate¶Recommended Pad and Hole dia.(TOP VIEW)6-f1.5CaseBottom Coverf1±0.13.59.9[0.14][0.39]¶Unit : 0.1inch¶Dimension : mm2.547.625.08[0.1][0.3][0.2]+Vin-VinRC20.32[0.8]+VoutTRM-Vout10.1610.16[0.4][0.4]25.4[1.0]¶Tolerance±0.5 [±0.02]¶Dimensions in mm, [ ]=inches¶Pin terminal material : Copper¶Plating treatment of terminal : Lead free plating¶Case material : Brass¶Plating treatment of case : Nickel plating¶Bottom Cover : FR4 (t=0.6) [t=0.024]¶Please keep enough creepage distance with thepattern on PCB and other components.¶Weight 30g max25.4[1.0]? 381 ?MG-70