Summary
COSEL Power Supply, Noise Filter 2025 Product Catalog
GENERAL SPECIFICATIONSISOLATIONENVIRONMENTSAFETYOTHERSINPUT-OUTPUTINPUT-CASEOUTPUT-CASEOPERATING TEMP.,HUMID.AND ALTITUDESTORAGE TEMP.,HUMID.AND ALTITUDEVIBRATIONIMPACTAGENCY APPROVALSCASE SIZE/WEIGHTCOOLING METHOD*1 SUCW1R5xx12/SUCW1R5xx15 is available as single output, +24V/+30V.*2 Rated input 5V, 12V, 24V or 48V DC Io=100%*3 Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals.*4 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.* Parallel operation with other model is not possible.SUCS1R5AC500V 1minute, Cutoff current =10mA, DC500V 50MW min (20t15C)AC500V 1minute, Cutoff current =10mA, DC500V 50MW min (20t15C)AC500V 1minute, Cutoff current =10mA, DC500V 50MW min (20t15C)-40 to +85C, 20 -95%RH (Non condensing) (Refer to“Derating”), 3,000m (10,000feet) max-40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max10 -55Hz, 98.0m/s 2 (10G), 3minutes period, 60minutes each along X, Yand Z axis490.3m/s 2 (50G), 11ms, once each along X, Yand Z axisUL60950-1, C-UL, EN62368-122.4X7.0X13.2mm [0.88X0.28X0.52 inches] (WXHXD) /3g maxConvection/Forced airExternal view1. SMD(type B)+VinAdsorption areaModel+VoutComponent areaRecommended Pad and Hole dia.(TOP VIEW)type BSU . SUC/SUT7.62±0.2[0.3]-VinTRM-VoutCloseup of part A2.54Part ACoplanarity within 0.1[0.004]1.4[0.06]1.3[0.05]1.9[0.07]23.2 [0.08]3.2[0.13] 25.22 [0.13][0.99]type Co1.65-o0.9 [0.06][0.04]Unit : 0.1inchDimensions in mm, [ ]=inches2. DIP(type C)+Vin-VinModel+VoutTRM-VoutCloseup of part AComponent area0.1min[0.004]Part A¶Tolerance±0.5 [±0.02]¶Dimensions in mm, [ ]=inches¶Pin terminal thickness : 0.3±0.1 [0.012]¶Pin terminal material : Copper alloy¶Plating treatment of terminal : Lead free plating¶Case thickness : 0.2±0.05 [0.008]¶Case material : Brass¶Plating treatment of case : Nickel plating¶Please keep enough creepagedistance with the pattern on PCBand other components.¶Weight : 3g max2.44Pin terminal part details1.8±0.3[0.07](0-10?)0.6±0.1[0.02]7[0.28]0.8 min 0.7±0.4[0.03] [0.03]22.4[0.88]1[0.04]23.62±0.6[0.93]12.7[0.5]13.2[0.52]+0.5-0.250.1min[0.004]2.54 +0.5-0.25 2.54±0.2[0.1] [0.1]7.62±0.2[0.3]7.62±0.20.6±0.1 [0.3][0.02]3.68±0.257[0.14][0.28]22.4[0.88]12.7[0.5]13.2[0.52]2.44 +0.5-0.25 2.54±0.2[0.1] [0.1]7.62±0.2[0.3][0.1]+0.5-0.25[0.1]1[0.04]20.32[0.8]? 409 ?SU . SUC/SUT-19