Summary
COSEL Power Supply, Noise Filter 2025 Product Catalog
GENERAL SPECIFICATIONSINPUT-OUTPUTAC500V 1minute, Cutoff current =10mA, DC500V 50MW min (20t15C)ISOLATIONINPUT-CASEAC500V 1minute, Cutoff current =10mA, DC500V 50MW min (20t15C)OUTPUT-CASEAC500V 1minute, Cutoff current =10mA, DC500V 50MW min (20t15C)OPERATING TEMP.,HUMID.AND ALTITUDE-40 to +85C, 20 -95%RH (Non condensing) (Refer to“Derating”), 3,000m (10,000feet) maxSTORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) maxENVIRONMENTVIBRATION10 -55Hz, 98.0m/s 2 (10G), 3minutes period, 60minutes each along X, Yand Z axisIMPACT490.3m/s 2 (50G), 11ms, once each along X, Yand Z axisSAFETYAGENCY APPROVALSUL60950-1, C-UL, EN62368-1OTHERS*1 SUTW10xx12/SUTW10xx15 is available as single output, +24V/+30V.*2 Rated input 5V, 12V, 24V or 48V DC Io=100%*3 Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals.*4 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.* Parallel operation with other model is not possible.SUTS10External viewModel29.3[1.15]Recommended Pad and Hole dia.(TOP VIEW)13.617-f0.913.61[0.54][0.04][0.54]SU . SUC/SUT0.5[0.02]6.85[0.27]4-f1.6[0.06]Part A0.6±0.11[0.02][0.04]17.78±0.213.61[0.7][0.54]3.5±0.25[0.14]-Vin RC +Vin +Vout NC TRM -Vout5.08±0.213.61[0.2]2.54±0.2[0.54][0.1]45.2[1.78]¶Back View8.35[0.33]Part B1[0.04]6.85 1.9[0.27] [0.07]9.15[0.36]OutlineUnit : 0.1inchDimensions in mm, [¶Tolerance±0.5 [±0.02]¶Dimensions in mm, [ ]= inches¶Pin terminal thickness : 0.3±0.1 [0.012]¶Pin terminal material : Copper alloy¶Plating treatment of terminal : Lead free plating¶Case thickness : 0.2±0.05 [0.008]¶Case material : Brass¶Plating treatment of case : Nickel plating¶Please keep enough creepage distance withthe pattern on PCB and other components.¶Weight : 14g maxCloseup of part ACloseup of part B]= inches13.61[0.54]6.85[0.27]: Conduction Area? 433 ?SU . SUC/SUT-43