title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

DC-DC Converters PCB Mount Value-added TypeSTMGFW15Ordering informationSTMGF W 15 24 05 -O1 2 3 4 5 6DIN rail installation type(Option : -N2)1 Series name2 Dual output3 Output wattage4 Input voltage5 Output voltage6 OptionalG : Capacitor betweenInput and Output is removed.R : with Remote ON/OFF(Positive logic control)J : Input/Output ConnectorJN1 : Connector with case coverN2 : With DIN rail installation typeJN3 : Connector with cover(plastic)and DIN rail installation type*When the option is setspecifications may vary.Standard typeConnector type(Option : -J)Connector with case cover(Option : -JN1)STMG*Please remove short piece on CN4 to enable remote ON/OFF function.MODELSTMGFW152405 STMGFW152412 STMGFW152415 STMGFW154805 STMGFW154812 STMGFW154815MAX OUTPUT WATTAGE[W] 15 15.6 15 15 15.6 15VOLTAGE[V] *1±5 or +10±12 or +24±15 or +30±5 or +10±12 or +24±15 or +30DC OUTPUTCURRENT[A] 1.5 0.65 0.5 1.5 0.65 0.5SPECIFICATIONSMODELSTMGFW152405 STMGFW152412 STMGFW152415 STMGFW154805 STMGFW154812 STMGFW154815VOLTAGE[V]DC9 - 36DC18 - 76INPUTCURRENT[A]*20.74typ0.74typ0.70typ0.37typ0.37typ0.36typEFFICIENCY[%]*284typ88typ89typ84typ87typ88typVOLTAGE[V]±5(+10)±12(+24)±15(+30)±5(+10)±12(+24)±15(+30)CURRENT[A]1.50.650.51.50.650.5LINE REGULATION[mV]40max60max75max40max60max75maxLOAD REGULATION[mV]RIPPLE[mVp-p]0 to +60C100max100max100max100max100max100maxOUTPUT*6 -20 to +60C200max200max200max200max200max200maxTEMPERATURE REGULATION[mV]DRIFT[mV]*750max50max60max50max50max60maxSTART-UP TIME[ms]30max (Minimum input, Io=100%)OUTPUT VOLTAGE SETTING[V]*84.93 - 5.2411.76 - 12.5014.60 - 15.514.93 - 5.2411.76 - 12.5014.60 - 15.51PROTECTION OVERCURRENT PROTECTIONCIRCUIT ANDWorks over 105% of rating and recovers automaticallyOTHERSREMOTE ON/OFFProvided (Negative logic L:ON, H:OFF)ISOLATIONENVIRONMENTSTMG-6INPUT-RC-OUTPUTINPUT-RC-FGOUTPUT-FGOPERATING TEMP.,HUMID.AND ALTITUDESTORAGE TEMP.,HUMID.AND ALTITUDEVIBRATIONIMPACTDC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)-20 to +70C, 20 to 95%RH (Non condensing) (Refer to“Derating”), 3,000m (10,000feet) max-20 to +75C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max10 - 55Hz, 19.6m/s 2 (2G), 3minutes period, 60minutes each along X, Y and Z axis196.1m/s 2 (20G), 11ms, once each along X, Y and Z axisSAFETY AGENCY APPROVALS UL60950-1, C-UL, EN62368-1 CompliesOTHERSCASE SIZE/WEIGHTCOOLING METHOD52X27X93mm [2.05X1.06X3.66 inches] (WXHXD) / 110g max (When the option is set, refer to the page STMG-7)Convection/Forced air*1Single output +10V, +24V, +30V with no use of COM.*2Rated input 12V, 24V or 48V DC lo=100%*3Symmetrical loading from 5% to 100%.*4Symmetrical loading from 20% to 100%.*5Refer to the instruction manual 7.*6Measured by 100MHz oscilloscpe or Ripple-Noise meter (Equivalent to KIKUSUI-GIKEN :RM103).*7Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C.? 446 ?*8 Rated input voltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C.* Parailel operation with other model is not possible.