title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

GENERAL SPECIFICATIONSISOLATIONENVIRONMENTINPUT-RC-OUTPUTINPUT-RC-FGOUTPUT-FGOPERATING TEMP.,HUMID.AND ALTITUDESTORAGE TEMP.,HUMID.AND ALTITUDEVIBRATIONIMPACTSTMGFS30DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)-20 to +70C, 20 to 95%RH (Non condensing) (Refer to“Derating”), 3,000m (10,000feet) max-20 to +75C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max10 - 55Hz, 19.6m/s 2 (2G), 3minutes period, 60minutes each along X, Y and Z axis196.1m/s 2 (20G), 11ms, once each along X, Y and Z axisSAFETY AGENCY APPROVALS UL60950-1, C-UL, EN62368-1 CompliesOTHERSCASE SIZE/WEIGHTCOOLING METHOD52×27×117mm [2.05×1.06×4.61 inches] (WXHXD) / 140g max (When the option is set, refer to the page STMG-10)Convection/Forced air*1STMGFW30xx05/STMGFW30xx12/STMGFW30xx15 is available as single output, +10V/+24V/+30V*2Rated input 12V, 24V or 48V DC lo=100%*3Measured by 100MHz oscilloscpe or Ripple-Noise meter (Equivalent to KIKUSUI-GIKEN : RM103).*4Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C.*5Rated input voltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C.*Parailel operation with other model is not possible.External viewStandard type* External view of option G, R are the same as standard model.External view of other type options, please refer to the page STMG-10.STMGTB1M3CN4Point ATB2M3Voltage Adjust2-f4.5 [f0.177]Mounting HoleRC(-)RC(+)-Vin+VinFG52 [2.05]6 [0.24] 40±0.5 [1.57]15.1±1.5 [0.59] 7.6 [0.3]6.2 [0.24]5.5[0.22]19.6±1.5[0.77]21106±0.5[4.17]97.5±1.5[3.84]99.8±1.5[3.93]117[4.61][0.24]6.2Terminal cover27max[1.06] max[0.3]7.618.4±1.5[0.73]37.1±1.5[1.46]Name Plate-Vout+VoutI/O ConnectorMatingConnectorRemote ON/OFF CN4 B2B-XH XHP-2TerminalChain : SXH-001T-P0.6Loose : BXH-001T-P0.6(Mfr.:J.S.T.)* Tolerance±1[±0.04]* Dimensions in mm, [ ]=inches* Weight : 140g max* PCB material / thickness : FR-4 / 1.6mm* Mounting plate : Iron (surface finishing : nickel plating) / t=1.0mm* Terminal block screw tightning torque M3 : 0.8N-m max* CN4 has been installed jumper as factory setting (Except option R).When remoto ON/OFF is used , please remove the installed jumper.? 449 ?STMG-9