title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

AC-DC Power Supplies Enclosed TypeInstruction Manual? -T5-Acquired UL508.-CN1 to CN4 will be changed to push-in type terminal blocks.- The constant currrent set value external variables, Remote sensing,Series operation, and AUX functions are deleted.-How to use remote ON/OFF contorols changes.-The RC2 and RCG isolation specifi cations are deleted.-Please contact us for any other conditions.Table 6.7 IsolationAC500V 1minute, Cutoff current = 100mA,OUTPUT-PG, INFO, DSDC500V 50MΩmin (At Room Temperature)Table 6.8 Specifications of remote ON/OFFFig.6.9 RC circuit example -T5SWLogicTerminalblocksTB1TB2TB3TB4OutputonOutputoffTB1TB2SW open(0.1mA max)SW short(0.5mA min)TB3TB415?19VTB1TB2Fig.6.10 Example of option T5Table 6.9 Pin assignments10k150Inside of power supplyFig.6.9 RC circuit examplePin No. Function Ground level1VTRM: Adjustment of output voltageCOM2COM: Common ground (for signal)COM3CB: Current BalanceCOM4CB: Current BalanceCOM1INFO: Extended UART signalSGND2DS: Data Shared signalSGND3SGND: Signal groundSGND4RC2: Remote ON/OFFCOM5RCG: Remote ON/OFF groundCOM1PG: AlarmPGG2PGG: Alarm groundPGG1COM: Common ground (for signal)COM2VTRM_EN : Enable VtrmCOM3SLV_EN: Enable Slave modeCOM123412345RC2RCG12123SWoutside ofpower supplyTB3TB4Table 6.10 Input and Output terminal wire sizeTerminal blocksWire sizeCrimp terminalType ManufacturerInputAWG 20 - 10-AWG 14 - 10-NICHIFUTable 6.11 Recommended Ferrule terminalsType Manufacturer Wire size Model Crimp toolAWG 20 AI0.5-6WHPhoenixSquare typeAWG 22 AI0.34-6TQ CRIMPFOX 6ContactAWG 24 - 26 AI0.25-6BUTable 6.12 For TB1 to TB4 Applicable wire sizeWire sizeAWG 20 - 26Wire insulation strip length6mm- Fig.6.11and Fig.6.12 is the how to connect/release the wire.-How to connect the Ferrule terminals and the solid wireStep1: Insert the wire until the electrode is not visible. (Refer to thefi g.6.11(a).)Inserting a flat-blade screwdriver into the release holemakes it easier to insert. (Refer to the fi g.6.11(b).)Step2: Pull the wire lightly in order to make sure it is fi xed.Wire（a）Flat-blade screwdriverWire insertionholeRelease holeWire（b）Wire insertionholeRelease holeFig.6.11 Connecting method of Ferrule terminal and Solid wire-How to release the Ferrule terminal and Solid wireStep1: Insert a fl at-blade screwdriver into the release hole. (Referto the fig.6.12(a).)Step2: Remove the wire with the fl at-blade screwdriver inserted inthe release hole. (Refer to the fi g.6.12(b).)Step3: Remove the fl at-blade screwdriver from the release hole.(Refer to the fig.6.12(c).)（a）（b）（c）Fig.6.12 Releasing method of Ferrule terminal, Solid wire and Stranded wirePCA-34