title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

DC-DC Converters Bus Converter . Power Module TypeCHS200Ordering informationCH S 200 48 05 -O1 2 3 4 5 6R1 Series name2 Single output3Output power4 Input voltage48:DC36-76V5 Output voltage3R3:3.3V05:5.0V12:12V6 OptionalR : with Remote ON/OFFPositive logic controlU : Shut down in protectioncircuit workingB : BasePlate option withMounting hole M3L2 :Pin length 5.3mmL5 :5pins option(+S,-S,TRM less)CHSMODELCHS200483R3CHS2004805CHS2004812MAX OUTPUT WATTAGE[W]165.0200.0192.0DC OUTPUT3.3V 50A5.0V 40A12V 16ASPECIFICATIONSMODELCHS200483R3CHS2004805CHS2004812VOLTAGE[V]DC36 - 76INPUTCURRENT[A]*1 3.70typ4.43typ4.26typEFFICIENCY[%]*1 93typ94typ94typVOLTAGE[V]3.3512CURRENT[A]504016LINE REGULATION[mV]10maxLOAD REGULATION[mV]10maxRIPPLEOUTPUTRIPPLE NOISE[mVp-p] *2 120max 150max 180maxTEMPERATURE REGULATION[mV] 66max 100max 240maxDRIFT[mV]*3 16max20max40maxSTART-UP TIME[ms]200max (DCIN 48V, Io=100%)OUTPUT VOLTAGE Fixed (TRM pin open), adjustable by external resistor*4ADJUSTMENT RANGE -10% / +15%-10% / +20% -10% / +10%OUTPUT VOLTAGE SETTINGt1.6%OVERCURRENT PROTECTIONWorks over 105% of rating (Auto restart)PROTECTION OVERVOLTAGE PROTECTION 120% - 140% (Auto restart) 125% - 145% (Auto restart) 115% - 135% (Auto restart)CIRCUIT ANDOTHERS REMOTE SENSING ProvidedREMOTE ON/OFFProvided (Negative logic L:ON, H:OFF)INPUT-OUTPUTDC2,250V or AC1,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)ISOLATIONINPUT-BASEPLATE*5 DC2,250V or AC1,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)OUTPUT-BASEPLATE*5 AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20t15C)OPERATING TEMP.,HUMID.AND ALTITUDE-40 to +85C, 20 - 95%RH (Non condensing) (Refer to“Derating”), 3,000m (10,000feet) maxSTORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) maxENVIRONMENTVIBRATION10 - 55Hz, 49.0m/s 2 (5G), 3minutes period, 60minutes each along X, Y and Z axisIMPACT196.1m/s 2 (20G), 11ms, once each along X, Y and Z axisSAFETYAGENCY APPROVALSUL60950-1, C-UL (CSA60950-1), EN62368-157.9 X10.5X22.76mm [2.28X0.41X0.9 inches] (WXHXD) / 30g maxCASE SIZE/WEIGHTOTHERS58.4 X12.7X23.26mm [2.3X0.5X0.92 inches] (WXHXD) / 45g max *5COOLING METHODConvection / Forced air / Conduction*1 At rated input(DC48V) and rated load. Ta=25C, 2m/s.*2 Ripple and ripple noise is measured by using measuring board with ceramic capacitor 22mF.*3 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.*4 Refer to the instruction manual for input voltage derating.*5 BasePlate Option.CHS-10? 490 ?