title: COSEL Power Supply, Noise Filter 2025 Product Catalog

page
550/1330

This page is the summary of page 550 of the ebook "COSEL Power Supply, Noise Filter 2025 Product Catalog."

You can click "Open This Page" or "Open 1st Page" button, and open the ebook.

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

DC-DC Converters PCB Mount TypeMGXW6Ordering informationMGX W 6 24 12 -O1 2 3 4 5 6R1 Series name2 Dual output3 Output wattage4 Input voltage5 Output voltage6 OptionalY2 : Output voltageadjustable (+10%, -5%)MODEL MGXW62412 MGXW62415MAX OUTPUT WATTAGE[W] 6.00 6.00DC OUTPUTSPECIFICATIONSINPUTMG-40VOLTAGE[V] *1±12 or +24±15 or +30CURRENT[A] 0.25 0.2MODEL MGXW62412 MGXW62415VOLTAGE[V]DC6 - 60 (Surge voltage 76V, 100ms max) (Refer to“Derating”for input voltage derating.)CURRENT[A] *2 0.29typ 0.29typEFFICIENCY[%] *2 87typ 87typVOLTAGE[V]±12 (+24)±15 (+30)CURRENT[A] 0.25 0.2LINE REGULATION[mV] 60max 75maxLOAD REGULATION[mV]*3 480max 600max*4 600max 750maxPo=30% -120max120maxRIPPLE[mVp-p]Po=0 - 30%*5480max480maxOUTPUTRIPPLE NOISE[mVp-p]Po=0 - 30%*5600max600maxVin=DC48 - 60V600max600maxTEMPERATURE-20 to +75C190max230maxREGULATION[mV]-40 to +75C300max360maxDRIFT[mV]*648max60maxSTART-UP TIME[ms]30maxOUTPUT VOLTAGE SETTING[V]11.64 - 12.3614.55 - 15.45PROTECTION OVERCURRENT PROTECTIONWorks over 105% of rating and recovers automaticallyCIRCUIT ANDOTHERS REMOTE ON/OFFProvided (Negative logic L : ON, H : OFF)GENERAL SPECIFICATIONSISOLATIONINPUT-OUTPUTDC1,500V or AC1,000V 1minute, Cutoff current=10mA, DC500V 1,000MW min (20±15C)OPERATING TEMP.,HUMID.AND ALTITUDE-40 to +85C, 20 to 95%RH (Non condensing) (Refer to“Derating”), 5,000m (16,400feet) maxENVIRONMENTIMPACT490.3m/s 2 (50G) 11ms, once each along X, Y and Z axisSAFETYAGENCY APPROVALSUL60950-1, C-UL, EN62368-1OTHERS*1Single output +24V, +30V with no use of COM.*2Rated input 24V DC Io=100%*3Symmetrical loading from 20% to 100%.*4Symmetrical loading from 0% to 100%.*5Ripple and Ripple Noise is measured by using test board with ceramic capacitor 1 F at50mm from output pins. (20MHz Osilloscope). Po:Output wattage.*6 Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C.* Parallel operation with other model is not possible.