title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

AC-DC Power Supplies Bus Converter . Power Module TypeTUNS50FOrdering informationTUN S 50 F 05 -O1 2 3 4 5 6R* Providing heat sinkas option1 Series name2 Single output3 Output wattage4 Universal Input5 Output voltage6 OptionalT : with Mounting hole(f3.4 thru)*Avoid short circuit between +BC and -BC. It may cause the failure of inside components.*Keep TRM open, if output voltage adjustment is not necessary.TUNSMODELTUNS50F05TUNS50F12TUNS50F24MAX OUTPUT WATTAGE[W]50.050.450.4DC OUTPUT5V 10A12V 4.2A24V 2.1ASPECIFICATIONSMODELTUNS50F05TUNS50F12TUNS50F24VOLTAGE[V]AC85 - 264 1f (Refer to“Derating”)CURRENT[A]FREQUENCY[Hz]50/60 (47 - 63)INPUTEFFICIENCY[%]POWER FACTOR (Io=100%)INRUSH CURRENTLimited by external components (Thermistor)LEAKAGE CURRENT[mA]0.75max (ACIN 240V 60Hz, Io=100%, According to IEC62368-1)VOLTAGE[V]51224CURRENT[A]104.22.1LINE REGULATION[mV]10max24max48maxLOAD REGULATION[mV]10max24max48max0 to +100C *180max120max120maxRIPPLE[mVp-p]-40 to 0C *1120max150max150max0 to 15% Load *1200max280max380maxOUTPUT0 to 15% Load *1280max360max460maxTEMPERATURE REGULATION[mV]DRIFT[mV]*220max40max90maxOUTPUT VOLTAGE ADJUSTMENT RANGE[V]Fixed (TRM pin open), adjustable by external resistor or external signal4.50 - 6.00 10.80 - 13.20 21.60 - 26.40OUTPUT VOLTAGE SETTING[V]4.97 - 5.1311.91 - 12.2923.62 - 24.38PROTECTIONCIRCUIT ANDOTHERSOVERCURRENT PROTECTIONWorks over 105% of rating and recovers automaticallyOVERVOLTAGE PROTECTION[V]6.30 - 7.0013.90 - 16.3527.60 - 32.40REMOTE SENSINGNot providedREMOTE ON/OFFNot providedINPUT-OUTPUTAC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C)ISOLATIONINPUT-FGAC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C)OUTPUT-FGAC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20±15C)OPERATING TEMP.,HUMID.AND ALTITUDE-40 to +100C (On aluminum base plate), 20 - 95%RH (Non condensing) (Refer to“Derating”), 3,000m (10,000 feet) maxENVIRONMENTIMPACT196.1m/s 2 (20G), 11ms, once each along X, Y and Z axisSAFETY ANDAGENCY APPROVALSUL60950-1, C-UL (CSA60950-1), EN62368-1NOISE REGULATIONSHARMONIC ATTENUATORComplies with IEC61000-3-2 (Class A) *3OTHERS*1Refer to instruction manual for measuring method of electric characteristics.*2Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.*3Please contact us about another class.TUNS-2? 554 ?