title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

RAC-DC Power Supplies DIN Rail TypeKHEA/KHNA120FUL508Ordering informationKHO A -120 F -24 -O1 2 3 4 5 6Example recommended EMI/EMC filterNAC-04-472-DHigh voltage pulse noise type : NAP seriesLow leakage current type : NAM series* A higher current rating EMI/EMC filtermay be recommended in view of theother devices that could be connectedin parallel with the power supply.1 Series nameKHE：Euro style I/O terminalsKHN：Barrier blocks styleI/O terminals2 Single output3 Output wattage4 Universal input5 Output voltage6 OptionC : with CoatingN2 : Screw mountingKH*Make sure necessary tests will be carried out on your end equipment with the power supply installed in accordance with any required EMC/EMI regulations.MODELKHEA / KHNA120F-24MAX OUTPUT WATTAGE[W]120DC OUTPUT24V 5A (Peak 7.5A)SPECIFICATIONSMODELKHEA / KHNA120F-24VOLTAGE[V]AC85 - 264 1f or DC88 - 370 *10CURRENT[A]FREQUENCY[Hz]50 / 60 (45 - 66) or DCACIN 115V 90typEFFICIENCY[%]INPUTACIN 230V 92typPOWER FACTORINRUSH CURRENT[A]ACIN 115V15typ (at cold start Ta=25C)*1 ACIN 230V30typ (at cold start Ta=25C)LEAKAGE CURRENT[mA]0.45 / 0.75max (ACIN 100V / 240V 60Hz, Io=100%, According to IEC62368-1 and DEN-AN)VOLTAGE[V]24CURRENT[A]5PEAK CURRENT[A]*27.5LINE REGULATION[mV]*396maxLOAD REGULATION[mV]*3150max *40 to +70C120maxRIPPLE[mVp-p]*5 -25 - 0C240maxIo=0 - 30%240max *4OUTPUTIo=0 - 30%300max *40 to +70C 240max *4TEMPERATURE REGULATION[mV]-25 to +70C 360max *4DRIFT[mV]*696maxSTART-UP TIME[ms]750max (ACIN 115V, Io=100%)HOLD-UP TIME[ms]20typ (ACIN 115V, Io=100%)OUTPUT VOLTAGE ADJUSTMENT RANGE[V]22.5 to 28.5OUTPUT VOLTAGE SETTING[V]24.0±1.0%OVERCURRENT PROTECTIONWorks over 101% of peak current and recovers automaticallyOVERVOLTAGE PROTECTION[V] 30.0 to 36.0PROTECTIONREMOTE ON/OFF (RC) ProvidedCIRCUIT ANDDC_OK LAMPLED (Green)OTHERSALARM LAMPLED (Red)DC_OK CONTACTRelay contact 30VDC 1A max, 30VAC 0.5A max (resistive load) (Only KHEA)INPUT-OUTPUTAC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min（At Room Temperature）ISOLATIONOUTPUT-RC, DC_OKAC500V 1minute, Cutoff current = 100mA, DC500V 50MW min（At Room Temperature）OPERATING TEMP.,HUMID.AND ALTITUDE-25 to +70C, 20 - 90%RH (Non condensing), Type tested for -40C start-up (Refer to“Derating”)ENVIRONMENTIMPACT196.1m/s 2 (20G), 11ms, once each X, Y and Z axis (Packing state)AC input UL60950-1, C-UL (CSA60950-1), EN62368-1, UL508, UL121201, ATEX, GL, Complies with DEN-ANSAFETY AND AGENCY APPROVALSDC input UL60950-1, C-UL (CSA60950-1), EN62368-1NOISECONDUCTED NOISE Complies with FCC-B, VCCI-B, CISPR22-B, EN55011-B, EN55022-BREGULATIONSHARMONIC ATTENUATOR Complies with IEC61000-3-2（Class A) *7CASE SIZE*837X124X117mm (WXHXD) [1.46X4.88X4.61 inches]OTHERSWEIGHT580g maxCOOLING METHODConvectionKH-8? 610 ?