title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

AC-DC Power Supplies Enclosed TypePDA300FOrdering informationPD A 300 F -O -O1 2 3 4 5 6RExample recommended EMI/EMC filterNAC-06-472High voltage pulse noise type : NAP seriesLow leakage current type : NAM series* A higher current rating EMI/EMC filtermay be recommended in view of theother devices that could be connectedin parallel with the power supply.1Series name2Single output3Output wattage4Universal input5 Output voltage6 Optional *1C: with CoatingG: LOW leakage currentN1 : with DIN railFor option details, refer toInstruction Manual 8.1.MODEL PDA300F-3R3 PDA300F-5 PDA300F-12 PDA300F-15 PDA300F-24 PDA300F-36 PDA300F-48MAX OUTPUT WATTAGE[W] *2 198 300 324 330 336 324 336ACIN 100V 3.3V 60A 5V 60A 12V 27A 15V 22A 24V 14A 36V 9A 48V 7ADC OUTPUT *2ACIN 230V *3 3.3V 60A 5V 60A 12V 27A 15V 22A 24V 14 (16.5) A 36V 9A 48V 7ASPECIFICATIONSMODELPDA300F-3R3 PDA300F-5PDA300F-12PDA300F-15PDA300F-24PDA300F-36PDA300F-48VOLTAGE[VAC]*285 - 264 1f (Refer to Instruction Manual 1.1)CURRENT[A]FREQUENCY[Hz]50 / 60 (45-66)ACIN 100V 70.0typ 75.0typ 79.0typ 80.5typ 82.0typ 81.0typ 82.5typEFFICIENCY[%]INPUTACIN 230V 72.5typ 78.0typ 82.0typ 84.0typ 84.5typ 84.5typ 86.0typPOWER FACTORACIN 100V0.99typ(Io=100%)ACIN 230V0.95typACIN 100V 20typ (Io=100%) at cold startINRUSH CURRENT[A]ACIN 230V 40typ (Io=100%) at cold startLEAKAGE CURRENT[mA]0.4 / 0.75 max (ACIN 100V / 240V, 60Hz, Io=100%, According to IEC62368-1, and DEN-AN)VOLTAGE[V]3.351215243648ACIN 100V 60 60 27 22 14 9 7CURRENT[A] *3ACIN 230V 60 60 27 22 14 (16.5) 9 7LINE REGULATION[mV]20max20max48max60max96max144max192maxLOAD REGULATION[mV]40max40max100max120max150max150max300maxRIPPLE[mVp-p]*4OUTPUTRIPPLE0 to +50C 120max 120max 150max 150max 150max 200max 200maxNOISE[mVp-p] *4 -20 to 0C 160max 160max 180max 180max 180max 240max 500maxTEMPERATURE0 to +50C40max50max120max150max240max360max480maxREGULATION[mV]-20 to +50C60max75max180max180max290max440max600maxDRIFT[mV]*512max20max48max60max96max144max192maxSTART-UP TIME[ms]300typ (ACIN 100V, Io=100%)HOLD-UP TIME[ms]35typ (ACIN 100V, Io=100%)OUTPUT VOLTAGE ADJUSTMENT RANGE[V]2.64 to 3.963.96 to 6.008.25 to 13.2010.50 to 16.5016.50 to 26.4025.20 to 39.6038.40 to 56.00OUTPUT VOLTAGE SETTING[V]3.30 to 3.405.00 to 5.1512.00 to 12.4815.00 to 15.6024.00 to 24.9636.00 to 37.4448.00 to 49.92OVERCURRENT PROTECTION Works over 105% of rating and recovers automaticallyPROTECTIONOVERVOLTAGE PROTECTION[V] 4.30 to 6.30 6.50 to 8.00 14.40 to 18.60 18.00 to 23.30 28.80 to 37.20 43.20 to 54.00 57.60 to 80.00CIRCUIT ANDOTHERSREMOTE SENSINGProvidedREMOTE ON/OFFProvidedINPUT-OUTPUT-RC3,000VAC 1minute, Cutoff current = 10mA, 500VDC 100MWmin (At Room Temperature)ISOLATIONOUTPUT-RC-AUX500VAC 1minute, Cutoff current = 100mA, 500VDC 100MW min (At Room Temperature)OPERATING TEMP.,HUMID.AND ALTITUDE *2-20 to +70C (Refer to“Derating”), 20 - 90%RH (Non condensing)ENVIRONMENTIMPACT196.1m/s 2 (20G), 11ms, once each X, Y and Z axisSAFETY ANDAGENCY APPROVALS (At only AC input) UL62368-1, C-UL (equivalent to CAN/CSA-C22.2No.62368-1), EN62368-1, Complies with DEN-ANNOISECONDUCTED NOISEComplies with CISPR11-B, CISPR32-B, EN55011-B, EN55032-B, FCC Part15-B, FCC Part18-B, VCCI-BREGULATIONSHARMONIC ATTENUATOR*6Complies with IEC61000-3-2 (Class A)OTHERS*1 The listed options may affect the published standard specifications. Please contact us fordetailed product specifications.*2 Derating is required. Please contact us for DC input.*3 ( ) means peak current. Peak loading for 10s. And Duty 35% max, refer to Instruction manualin detail.*4 This is the value measured on measuring board with capacitor of 22μF within 150mm fromoutput terminal.Measured by 20MHz Oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN :RM-104).PDA-12*5 Drift is the change in DC output for an eight hour period after a half-hour warm-up at25a, with the input voltage held constant at the rated input/output.*6 Please contact us about another class. When two or more units are operating it may notcomply with the IEC61000-3-2. Please contact us for details.* To meet the specification, do not operate overload condition.* Sound noise may be generated by power supply in case of pulse load.