title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

AC-DC Power Supplies Medical TypeAEA800FOrdering informationAE A 800 F -OO -O1 2 3 4 5 6AEA2MOPPAEA-4RPlease refer to derating curve, because the rated load current depends on cooling method that is convection cooling or forced air.*Make sure necessary tests will be carried out on your end equipment with the power supply installed in accordance with any required EMC/EMI regulations.MODELAEA800F-24AEA800F-30AEA800F-36AEA800F-48MAX OUTPUT WATTAGE[W]816816817816DC OUTPUT (forced air)SPECIFICATIONSMODELAEA800F-24AEA800F-30AEA800F-36AEA800F-48VOLTAGE[V]AC85 - 264 1f (Output derating is required at AC85 - 170V. See“Derating”)CURRENT[A]FREQUENCY[Hz]50/60 (45 - 66)ACIN 100V 92.5typ (Io=25.5A) 92.5typ (Io=20.4A) 92.5typ (Io=17.0A) 92.5typ (Io=12.7A)EFFICIENCY[%]INPUTACIN 230V 95.0typ (Io=34.0A) 95.0typ (Io=27.2A) 95.5typ (Io=22.7A) 95.5typ (Io=17.0A)POWER FACTORACIN 100V 20/40typ (Io=25.5A) 20/40typ (Io=20.4A) 20/40typ (Io=17.0A) 20/40typ (Io=12.7A)INRUSH CURRENT[A] *2ACIN 230V 40/40typ (Io=34.0A) 40/40typ (Io=27.2A) 40/40typ (Io=22.7A) 40/40typ (Io=17.0A)LEAKAGE CURRENT[mA]0.3max (ACIN 240V 60Hz, Io=100%, According to IEC60601-1)VOLTAGE[V]24303648CURRENT[A]LINE REGULATION[mV]96max120max144max192maxLOAD REGULATION[mV]150max200max240max300max0 to +50C 120max 200max 200max 250maxRIPPLE[mVp-p] *3OUTPUT-20 to 0C 230max 300max 300max 400maxRIPPLE NOISE[mVp-p] *3TEMPERATURE REGULATION[mV]0 to +50C240max300max360max480maxDRIFT[mV]*496max120max144max192maxSTART-UP[ms]550typ (ACIN 100V/230V) 750typ (ACIN 85V-264V)HOLD-UP[ms]20typ (ACIN 230V, Io=100%)OUTPUT VOLTAGE ADJUSTMENT RANGE[V]21.6 to 26.427.0 to 33.032.4 to 39.643.2 to 52.8OUTPUT VOLTAGE SETTING[V]23.5 to 24.529.0 to 31.035.0 to 37.047.0 to 49.0OVERCURRENT PROTECTIONWorks over 101% of peak current and recovers automatically *5OVERVOLTAGE PROTECTION[V] 30 to 33.6 37.5 to 42.0 45 to 50.4 60 to 69.6PROTECTIONALARMOptional (Input voltage alarm : PR, Output voltage alarm : PG)CIRCUIT ANDREMOTE ON/OFFOptionalOTHERSAUX1Optional (12V1A forced air)AUX2Optional (5V1A forced air)INPUT-OUTPUT-PR-PG-RC-AUX *6AC4,000V 1minute, Cutoff current = 10mA, DC500V 50MΩmin (At Room Temperature) 2MOPPISOLATIONOUTPUT-AUX1-PR-PG-RC-AUX2 *6AC100V 1minute, Cutoff current = 25mA, DC100V 10MΩmin (At Room Temperature)OPERATING TEMP.,HUMID.AND ALTITUDE-20 to +70C, 20 - 90%RH (Non condensing), 5,000m (16,500feet) maxENVIRONMENTIMPACT196.1m/s 2 (20G), 11ms, once each X, Y and Z axisUL62368-1, ANSI/AAMI ES 60601-1, C-UL (equivalent to CAN/CSA-C22.2 No.62368-1, CAN/CSA-C22.2 No.60601-1)SAFETY AND AGENCY APPROVALSEN62368-1, EN60601-1 3rd, EN62477-1 (OVCIII), UL508 (Optional), Complies with IEC60601-1-2 4th Ed.NOISECONDUCTED NOISE Complies with FCC Part15 classB, VCCI-B, CISPR32-B, EN55011-B, EN55032-BREGULATIONSHARMONIC ATTENUATOR *7 Complies with IEC61000-3-2 (Class A)OTHERS*1 The listed options may affect the published standard specifi cations.Please contact us for detailed product specifi cation*2 The current of input surge to a built-in EMI/EMS Filter (0.2ms or less) is excluded.*3 Measured by 20MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKUGIKEN:RM104).Please refer to the instruction manual 1.8.*4 Drift is the change in DC output for an eight hours period after a half-hour warm-up at 25C? 654 ?Example recommended EMI/EMC filterNAC-30-472High voltage pulse noise type : NAP seriesLow leakage current type : NAM series* Use of an EMI/EMC filter is recommendedwhen a power supply is connected with severaldevices so that additional filtering is necessary.* Make sure that your final application will meetthe required EMC standard by measuring theEMI level of the power supply used togetherwith an EMI/EMC filter.*5 When the overcurrent protection continues,the output may be shut down.*6 Applicable when AUX and remote control (optional) is added.*7 Please contact us about another class.* Sound noise may be generated by power supply in case of pulse load.1 Series name2 Single output3 Output wattage4 Universal input5 Output voltage6 Optional *1C : with CoatingN : with coverT : Vertical terminal blockJ : Connector typeR3 : with Subfeatures(5V1A AUX,12V1A AUXRemote ON/OFF, Alarm)I4: with MODBUS interface and Subfeatures(5V1A AUX,12V1A AUXRemote ON/OFF, Alarm)T5 : UL508 (Except 30V)P5 : shutdown type overcurrentprotectionFor option details, refer to instructionmanual 6.1.