This page is the summary of page 779 of the ebook "COSEL Power Supply, Noise Filter 2025 Product Catalog."
You can click "Open This Page" or "Open 1st Page" button, and open the ebook.
COSEL Power Supply, Noise Filter 2025 Product Catalog
EAC/EAM/EAP seriesExternal viewThis product is shipped in the following condition,because it is equipped with push-down terminals.1The terminal cover is retracted inside the unit.2The screws for connecting the terminals are held in the up right position.Standard TypeTerminal cover85[3.35]75±0.5[2.95]72[2.83]M4Protection EarthMounting Plate2.5 21[0.1] [0.83]11.5[0.45]2-M4InputTerminal9.7[0.38]Name Plate12.7[0.5]2-M4OutputTerminal31.5±0.5[1.24]39[1.54]Terminal cover2-f4.8[0.19] Mounting HoleM4Protection EarthTerminal cover¶Closed the terminal cover302[1.18][0.08]¶Tolerance :±1[±0.04]¶Weight : 170g max¶Mounting Plate : Iron (surface finishing:nickel plating)?=1.0 [0.04]¶Case?PBT¶Dimensions in mm, [ ]=inches¶Terminal block screw tightening torque M4?1.6N?m(16.9kgf?cm)maxDIN rail installation Type858.5 +2-1[3.35] [0.33]72[2.83]M4Protection EarthTerminal coverMounting Plate2.5 21[0.1] [0.83]11.5[0.45]Terminal cover¶Closed the terminal cover2-M4InputTerminal(9)9.7[0.35][0.38]M4Protection EarthName PlateTerminal cover2-M4OutputTerminal12.7[0.5]302[1.18][0.08]7[0.28]39[1.54]¶Tolerance :±1[±0.04]¶Weight : 170g max¶Mounting Plate : Iron (surface finishing:nickel plating)?=1.0 [0.04]¶Case?PBT¶Dimensions in mm, [ ]=inches¶Terminal block screw tightening torque M4?1.6N?m(16.9kgf?cm)maxDIN rail!Note when installing the EMI/EMCFilter on a DIN rail.(4.2)[0.17]DIN railWhen the EMI/EMC Filter is grounded throughthe DIN rail, the proper noise attenuation may notbe achieved.Be sure to connect the protection earth (PE) ofthe EMI/EMC Filter body to the earth.At least one PE connection is required.Name PlateEMI/EMCFilter? 777 ?EA/ES-2
