title: COSEL Power Supply, Noise Filter 2025 Product Catalog

Summary

COSEL Power Supply, Noise Filter 2025 Product Catalog

RPBA/PBWAC-DC Power Supplies Enclosed TypePBW30FOrdering informationPB W 30 F -O -O1 2 3 4 5 6Example recommended EMI/EMC filterNAC-06-4721 Series name2 Dual output3 Output wattage4 Universal input5 Output voltage6 Optional *10C : with CoatingG : Low leakage currentHigh voltage pulse noise type : NAP seriesLow leakage current type : NAM series* A higher current rating EMI/EMC filtermay be recommended in view of theother devices that could be connectedin parallel with the power supply.E : Low leakage currentand EMI class AT : Vertical terminal blockJ1 : VH (J.S.T.) connector typeN : with CoverN1 : with DIN railV : Output voltage settingpotentiometer externallyMODELPBW30F-5PBW30F-12PBW30F-15MAX OUTPUT WATTAGE[W]*5 1531.230.0VOLTAGE[V] *6 t5 ( +10 )t12 ( +24 )t15 ( +30 )DC OUTPUTCURRENT1[A]1.51.31.0CURRENT2[A]*5 2.01.71.4SPECIFICATIONSCover is optional*Make sure necessary tests will be carried out on your end equipment with the power supply installed in accordance with any required EMC/EMI regulations.MODELPBW30F-5PBW30F-12PBW30F-15VOLTAGE[V]AC85 - 264 1f or DC110 -370 (AC50 or DC70 Please refer to the instruction manual 1.1 Input voltage *8)CURRENT[A]FREQUENCY[Hz]50/60 (47 - 440) or DCINPUTACIN 100V 75typ (CURRENT1) 77typ (CURRENT1) 78typ (CURRENT1)EFFICIENCY[%]ACIN 200V 75typ (CURRENT1) 81typ (CURRENT1) 79typ (CURRENT1)ACIN 100V 15typ (CURRENT1) (At cold start)INRUSH CURRENT[A]ACIN 200V 30typ (CURRENT1) (At cold start)LEAKAGE CURRENT[mA]0.30/0.65max (ACIN 100V/240V 60Hz, Io=100%, According to IEC62368-1,DENAN)VOLTAGE[V]t5/ ( +10V reference number )t12/ ( +24V reference number )t15/ ( +30V reference number )CURRENT1[A]1.5/ 1.51.3/ 1.31.0/ 1.0CURRENT2[A]*5 2.0/-1.7/-1.4/-LINE REGULATION[mV]*9*11 20max/ 36max60max/ 96max60max/ 96maxLOAD REGULATION 1[mV]*3*11 250max/ 100max600max/ 150max600max/ 150maxLOAD REGULATION RIPPLE[mVp-p]OUTPUT0to +50C *1 120max / 300max 150max / 300max 150max / 300maxRIPPLE NOISE[mVp-p]-10 -0C *1 160max / 360max 180max / 360max 180max / 360maxTEMPERATURE REGULATION[mV]DRIFT[mV]*2 20max48max60maxSTART-UP TIME[ms]200typ(ACIN 100V, Io=100%) *Start-up time is 700ms typ for less than 1minute of applying input again from turning off the input voltage.HOLD-UP TIME[ms]20typ (ACIN 100V, Io=100%)OUTPUT VOLTAGE ADJUSTMENT RANGE[V]4.99 -6.00 (+V and -V are simultaneously adjusted)9.60 -13.2 (+V and -V are simultaneously adjusted)13.2 -16.5 (+V and -V are simultaneously adjusted)OUTPUT VOLTAGE SETTING[V]4.99 -5.30 (+V and -VCURRENT1)11.5 - 12.5 (+V and -V CURRENT1)14.4 - 15.6 (+V and -V CURRENT1)OVERCURRENT PROTECTIONWorks over 105% of rated current and recovers automaticallyPROTECTION OVERVOLTAGE PROTECTION[V] 6.90 -10.0 16.8 - 24.0 20.0 - 29.0CIRCUIT ANDOTHERS OPERATING INDICATION LED (Green)REMOTE ON/OFFNoneINPUT-OUTPUTAC3,000V 1minute, Cutoff current =10mA, DC500V 50MW min (At Room Temperature)ISOLATIONINPUT-FGAC2,000V 1minute, Cutoff current =10mA, DC500V 50MW min (At Room Temperature)OUTPUT-FGAC500V 1minute, Cutoff current =25mA, DC500V 50MW min (At Room Temperature)OPERATING TEMP.,HUMID.AND ALTITUDE-10 to +71C (Refer to“Derating”), 20 - 90%RH (Non condensing) 3,000m (10,000feet) maxSTORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 - 90%RH (Non condensing) 9,000m (30,000feet) maxENVIRONMENTVIBRATION10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axisIMPACT196.1m/s2 (20G), 11ms, once each X, Y and Z axisSAFETY AND AGENCY APPROVALS (At only ACinput)UL60950-1, C-UL(CSA60950-1), EN62368-1 Complies with DEN-ANNOISECONDUCTED NOISEComplies with FCC Part15 classB, VCCI-B, CISPR22-B, EN55011-B, EN55022-BREGULATIONSHARMONIC ATTENUATOR*12OTHERS*1 Measured by 20MHz oscilloscope or Ripple-Noisemeter(equivalent to KEISOKU-GIKEN : RM101).*2 Drift is the change in DC output for an eight hour periodafter a half-hour warm-up at 25C.*3 Figures for 0 to rated current 1.The current not measuredside is fixed.*4 Figures for 0 to rated current 2.The current not measuredPBA/PBW-28side is fixed.*5 The sum of +power -power must be less than output power.*6 t5,t12,t15 can be used as +10,+24 and +30.*7 When two or more units are used,they may not comply withthe harmonic attenuator. Please contact us for details.*8 Derating is required.*9 Figures to rated current 1.? 76 ?*10 Please contact us about safety approvals for the model withoption.*11 Please contact us about dynamic load and input response.*12 Please contact us about class C.* Parallel operation with other model is not possible.* Derating is required when operated with cover.* A sound may occur from power supply at peak loading.