This page is the summary of page 803 of the ebook "COSEL Power Supply, Noise Filter 2025 Product Catalog."
You can click "Open This Page" or "Open 1st Page" button, and open the ebook.
COSEL Power Supply, Noise Filter 2025 Product Catalog
NBC/NBM seriesExternal viewThis product is shipped in the following condition, because it is equipped with push-down terminals.1The terminal cover is retracted inside the unit.2The screws for connecting the terminals are held in the up right position.Standard Type2-f4.8[0.19]Mounting Hole92[3.62]82±0.5[3.23]80[3.15]2-Protection Earth2.530.5[0.1][1.2]8[0.31]InputTerminal15[0.59]Name PlateOutputTerminal±0.5[1.77]4553[2.09]InputTerminalOutputTerminal12[0.47]Terminal cover6-M4Terminal coverMounting Plate¶Closed the terminal cover41[1.61] [0.08]2¶Tolerance :±1[±0.04]¶Weight : 270g max¶Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04]¶Case : PBT¶Dimensions in mm, [ ]=inches¶Terminal block screw tightening torque M4:1.6N-m (16.9kgf-cm) maxDIN rail installation Type928.2±1.52.530.5[3.62][0.32][0.1][1.2]802-Protection Earth[3.15]8[0.31]InputTerminal15[0.59]InputTerminalName PlateOutputTerminalOutputTerminal12[0.47]53[2.09]Terminal cover6-M4Terminal coverMounting Plate¶Closed the terminal cover2[0.08]¶Tolerance :±1[±0.04]41[1.61]¶Weight : 270g max¶Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04]¶Case : PBT¶Dimensions in mm, [ ]=inches(9)[0.35]¶Terminal block screw tightening torque M4:1.6N-m (16.9kgf-cm) maxDIN rail7[0.28]!Note when installing the EMI/EMCFilter on a DIN rail.DIN railWhen the EMI/EMC Filter is grounded throughthe DIN rail, the proper noise attenuation may notbe achieved.Be sure to connect the protection earth (PE) ofthe EMI/EMC Filter body to the earth.At least one PE connection is required.Name PlateEMI/EMCFilter? 801 ?NB-4
