This page is the summary of page 807 of the ebook "COSEL Power Supply, Noise Filter 2025 Product Catalog."
You can click "Open This Page" or "Open 1st Page" button, and open the ebook.
COSEL Power Supply, Noise Filter 2025 Product Catalog
JAC series(6-30A)External viewThis product is shipped in the following condition, because it is equipped with push-down terminals.1The terminal cover is retracted inside the unit.2The screws for connecting the terminals are held in the up right position.Standard Type2-f5.5 [0.22]Mounting Hole132[5.20]119 (Terminal Block screw pitch)[4.69]Terminal Cover2.532[0.10][1.26]3-M4InputTerminalName Plate3-M4OutputTerminal9.7[0.38]50[1.97]13.3[0.52]63[2.48]Terminal cover¶Close the terminal coverMounting Plate118 (Mounting Hole pitch)[4.61]M4Protection Earth2[0.08]4.5[0.18]DIN rail installation Type8[0.31]44[1.73]4.5[0.18]132 9±2[5.20][0.35]119 (Terminal Block screw pitch)[4.69]¶Tolerance :±1[±0.04]¶Weight : 440g max¶Mounting Plate : Iron(surface finishing : nickel plating) t=1.0[0.04]¶Case : PBT¶Dimensions in mm, [ ]=inches¶Terminal block screw tighting torque M4 : 1.6N-m(16.9kgf-cm)maxTerminal Cover2.532[0.10][1.26]3-M4InputTerminalName Plate3-M4OutputTerminal9.7[0.38]13.3[0.52]63[2.48]Mounting PlateM4Protection EarthTerminal cover¶Close the terminal cover(9)4.5[0.18]DIN rail84.5[0.18][0.31]7 442[0.28] [1.73][0.08]¶Tolerance :±1[±0.04]¶Weight : 440g max¶Mounting Plate : Iron(surface finishing : nickel plating) t=1.0[0.04]¶Case : PBT¶Dimensions in mm, [ ]=inches¶Terminal block screw tighting torque M4 : 1.6N-m(16.9kgf-cm)max!Note when installing the EMI/EMC Filter on a DIN rail.DIN railWhen the EMI/EMC Filter is grounded throughthe DIN rail, the proper noise attenuation may notbe achieved.Be sure to connect the protection earth (PE) ofthe EMI/EMC Filter body to the earth.Name PlateEMI/EMCFilter? 805 ?JAC-2
