This page is the summary of page 819 of the ebook "COSEL Power Supply, Noise Filter 2025 Product Catalog."
You can click "Open This Page" or "Open 1st Page" button, and open the ebook.
COSEL Power Supply, Noise Filter 2025 Product Catalog
TAC/TAH series(4-30A)External viewThis product is shipped in the following condition, because it is equipped with push-down terminals.1The terminal cover is closed.2The screws for connecting the terminals are held in the up right position.Standard TypeInputTerminal128[5.04]118±0.5[4.65]83.5[3.29]Mounting PlateProtection Earth(2.5)50[0.1][1.97]20[0.79]19[0.75]InputTerminalName PlateOutputTerminalOutputTerminalOutputTerminal12[0.47]50±0.5[1.97]63[2.48]Terminal cover7-M4Terminal cover4-f5.5[0.22] Mounting Hole¶Closed the terminal cover64(2)[2.52][0.08]¶Tolerance :±1[±0.04]¶Weight : 620g max¶Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04]¶Case : PBT¶Dimensions in mm, [ ]=inches¶Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) maxDIN rail installation TypeInputTerminal10810 (11)[4.25] [0.39] [0.43]83.5[3.29]Mounting PlateProtection Earth(2.5)50[0.1][1.97]20[0.79]19[0.75]InputTerminalName PlateOutputTerminalOutputTerminalOutputTerminal12[0.47]63[2.48]Terminal cover7-M4Terminal cover¶Closed the terminal cover(9)[0.35]DIN rail764(2)[0.28][2.52][0.08]¶Tolerance :±1[±0.04]¶Weight : 620g max¶Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04]¶Case : PBT¶Dimensions in mm, [ ]=inches¶Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) max!Note when installing the EMI/EMCFilter on a DIN rail.When the EMI/EMC Filter is grounded throughthe DIN rail, the proper noise attenuation may notbe achieved.Be sure to connect the protection earth (PE) ofthe EMI/EMC Filter body to the earth.Name PlateDIN railEMI/EMCFilter? 817 ?TA-2
