Summary
COSEL Power Supply, Noise Filter 2025 Product Catalog
RRipple noise attenuation type for switch mode power supplies(DC)SNR series (10A)Ordering informationSNR -10 -223 -O1 2 3 41 Model Name2 Rated Current3 Line to ground capacitor code:See table 1.1.table1.1 Line to ground capacitor codeCodeLine to ground capacitor (nominal value)000Not Provided22322000pFDIN rail installation type4 OptionsD :DIN rail installation typeT :Terminal block typeDT :Terminal block and DIN rail typeTerminal block typeDIN rail installation type and Terminal block type are option* The dimensions change when the option is set.Refer to External view.Features of SNR series (10A)Ripple noise attenuation type for switch mode power supplies(DC)-50 VDC -Best filter for switch mode power supplies ofanalog circuitsSpecificationsNo.ItemsSNR-10-223Interface:Connector1Rated Voltage DC[V]502Rated Current DC[A]*110 (Peak 20)3Test Voltage (Terminal-Mounting Plate)500 VAC (Cutoff Current = 100mA), 1minute at room temperature and humidity4Isolation Resistance (Terminal-Mounting Plate)500 VDC 50MW min at room temperature and humidity5DC resistance20mW max6Operating temperature-40 to +71C (Refer to Derating Curve)7Operating humidity20 to 95%RH (Non condensing)8Storage temperature/humidity-40 to +75C/20 to 95%RH (Non condensing)9Vibration10 to 55Hz, 19.6m/s 2 (2G), 3min. Period, 1hour each X, Y and Z axis10Impact196.1m/s 2 (20G), 11ms Once each X, Y and Z axis11Safety agency approvalsUL60950-1, C-UL (CSA60950-1), EN62368-112Case size (without projection) /Weight52X35X117 mm [2.05X1.38X4.61 inches] (WXHXD) /140g max (Option : -D, -T, -DT refer to external view)*1 Peak current for 10 sec. And Duty 35% max, refer to Instruction Manual 5. In detail.Circuit DiagramDerating CurveIN+Vin-VinCYCY+Co+Vout-VoutOUTLoad Factor [%]10080605040200-40-30-20-10040506070 71 80EMI/EMCFilterCY : Line to ground capacitor Co : Electrolytic capacitor!Expected life : 10 years: Mounting PlateAmbient Temperature [C]SN-5 ? 906 ?